Registered: 5 days, 19 hours ago
Floor Protection - A Product Guide
Your floors want special protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for different events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can price thousands of dollars in replacement and repair costs. This article describes surface protection products for floors so as to make knowledgeable decisions on the perfect product to make use of for your needs.
Types of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products by the roll: These include widespread adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).
(2) Products by the sheet: These embody corrugated plastic, masonite, and different inflexible protection. Protective supplies purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as 4 feet by eight feet.
Type of Flooring Protection:
Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can usually leave adhesive residue when removed. Frequent paper protection products embody:
· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, water-resistant and made from recycled paper.
· Kraft paper is a lightweight brown paper that's inexpensive but does not afford any impact protection and may easily tear
· Scrim paper might incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to reinforce the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nonetheless they are additionally too thin to offer a lot impact protection.
· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The huge drawback of using Rosin paper is that it may cause a permanent stain if the paper gets wet. Rosin paper may rip easily so it not usually advisable for use
· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection however it will not be coated with a waterproof end and must be kept dry always so that it does not disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.
Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping in order that they shouldn't be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films don't provide any impact protection and are usually rated for brief time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled supplies making them a poor selection in maintainable protection. Protection films are available in quite a lot of adhesion "tack". Hard surface protection films will have a lower tack and colour than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the usual measurement of four ft by 8 feet and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Each products provide impact protection on quite a lot of floor types and provide adequate protection in opposition to heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nevertheless they're bulky to carry and store. These wood sheets ought to be used on top of a softer protection resembling a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and might be harder to chop to size than other protection types.
If you have any sort of questions regarding where and the best ways to make use of correx, you can call us at the web site.
Topics Started: 0
Replies Created: 0
Forum Role: Participant